Spandrel Coating and Drying Systems

Equipment Bulletin G101

TYPICAL APPLICATIONS:

Spandrel Glass for Architecture

Screen Printed Glass for Obscuration Panels and Partitions

Decorative Glass for Doors and Windows

ICD OPACI-COAT-300®*

Pine Oil Based Ceramic Ink, Lead Free

Terpinol Based Ceramic Ink, Lead Free

Water Based Ceramic Ink, Lead Free

System Specifications:

Model	S60-OPTW	S72-OPTW	S84-OPTW	S96-OPTW
Glass Width	60"	72"	84"	96"
Heated Width	72"	84"	96"	108"
Heated Length	16 FT	16 FT	16 FT	16 FT
Connected Load	146.3 KW	169.3 KW	192.3 KW	215.4 KW
Exhaust Capacity	800 CFM	1000 CFM	1200 CFM	1400 CFM
*Estimated Power Consumption Based on 50% Conveyor Utilization:*
*OPACI-COAT-300()**	76 KW/HR	85 KW/HR	100 KW/HR	110 KW/HR
Pine Oil	82 KW/HR	95 KW/HR	110 KW/HR	120 KW/HR
Terpinol	100 KW/HR	116 KW/HR	136 KW/HR	148 KW/HR
Water Base	125 KW/HR	145 KW/HR	170 KW/HR	185 KW/HR

Features:
Roll Coater:			Union Tool Heavy Duty Series #45, Model C Reverse Roll Coater
System Length:			Overall 40 Ft Including 10 Ft Infeed, 10 Ft Intermediate Conveyors
Conveyor Speed:			5-15 FPM
Roll Spacing			12" ( 24" minimum glass size)
Compliance:			Underwriter's laboratories (UL), CSA, NFPA, NEC, CE
Options Available:
	Power Management System PLC Operator's Control SCR Power Controls Cooling Section			Unload Conveyor Spare Coating Roll 6" Roll Spacing (12" minimum glass size) Custom Systems
Advantages:
	Minimum floor space requirement Lowest power useage Maximum green strength developed System size based on green strength requirements Documented tests of all current ceramic inks and OPACI-COAT-300 (*) Minimum maintenance required Over four decades of experience Over forty systems in operation worldwide

(*) OPACI-COAT-300 is a registered trademark of ICD, Vancouver, WA, USA
		Go here to view a printable PDF version of this bulletin.